[singlepic id=46 w=320 h=240 float=center]
Design Criteria:
- The Canadian DND HESV required that the wheels and tires in all locations on the truck were identical. The wheels that were chosen were from OTR South Africa and are a 3 piece design with a 335mm bolt circle diameter.
- Because the wheels need to be used facing inboard on the front and facing outboard on the rear, a double valve stem was required.
- Solid models were not available for the wheels so we built 3D models off of the 2D drawings to verify clearances.
[singlepic id=47 w=320 h=240 float=center]